ESPERO AUTO -WINDERS
Technical summary
Automatic Winder with independent winding units with individual motors controlled through inverter.
Models: ESPEROE-ESPERO l-ESPEROL-ESPEROM-ESPERO R.
Machine sides: right hand or1eft hand.
Number of winding Spindles:
ESPERO I 12-44 ESPERO E12-60 ESPERO L12-60
ESPERO M 12-6O ESPERO R12-60
Fields of application: staple yarns, cotton, worsted, woolen from Nm3,5to the finest counts.
Winding speed: from 400-1800m/min. With continuous variations.
Grooved winding drum: in special cast Iron.
Individual inverter on every winding unit, for continuous speed control.
Clearer: electronic-Uster-Loepfe-Peyer-keisokkl-WIth total yarn control.
Antikinking device/Economizer
Inspector control: for yarn length setting on delivered package and control of the winding process.
Waxing: by deflection, with double section yarn tensioned.
Feeding: bobbins with diameter=32-55/L=180-280(l-E)with diameter=32-65/L=186-350(L-M).
Delivery package conicity: 0-9-15'
Traverse 85-152mm
Diameter:φ125-300 mm with metered yarn length.
Package holder: with taper increment.
Braking instantaneous package lifting with braking independent from that of the drum.
Centralized settings: yarn tension, package holder counterweight and dampening device, air splice's, pneumatic pressure, winding speed, yarn metering, number of repeat yarn joining cycles.
Individual winding unit settings: waxing, knotted or splicer, preclearer, conicity increment on package holder, balloon breaker.
Cone tube feeding: automatic from centralized storage at headstock (for ESPEROEESPERO l and ESPERO L) or from individual cradle for every winding unit.
Connection to ring spinning frame: through convey or system with direct capacity: 1800 bobbins per hours (theoretical).
Automatic feeder capacity: 2000 bobbins per hour (theoretical).
Air exhaust: into the working room-overhead duct-underground duct.
Package conveyor be1t: unloading towards the headstock With manual or automatic drive activation.
Illumination along the machine.
Minimum energy consumption:
optimum dimensions of suction equipment, with automatic Hmltatlon of winding drums in simultaneous joining cycle and reduction of technological air. Slippage free transmission to winding drums. Minimum compressed air consumption. Trave11ing blower-suction unit programmed by Inspector Control, Minimum number of moving parts-Setting in motion of automatic doffing only after preset yarn len9thon package has been wound. Kinetic energy of cylinder is reutilize during braking stage. Motor operates as generator.
|
|
|
|
| Payment Details︰ | L/C |
| Min Order︰ | 1 |
|
|
|
